Remove the plastic packaging film when using it for the first time
When using, remove the plastic packaging film to keep the environment ventilated and dry, and avoid the mattress from getting damp. Do not let mattress insolate too long, make fabric fade.
Keep the mattress clean
A. Vacuum the mattress several times a year to keep it clean.
B. Wash the stains on the mattress with soap and water (do not use detergent) to avoid bacteria.
C. Often dry mattress to keep sleep fresh and comfortable. (latex or memory cotton mattress and other products, please avoid long-term exposure).
D. Use a cleaning pad.
Maintain ventilation
Some mattresses have air holes around the edges. When using, do not tighten the sheets and mattresses, so as to avoid blocking the air holes, causing the air in the mattresses unable to circulate and breed pathogens.
The new mattress should be turned over regularly
In the first six months of the new bed, the front and back, left and right, head and foot of the mattress are turned over each other once a month, and then fixed and turned every three months, which can eliminate the local depression caused by the weight squeezing the inner parent material of the mattress (4cm is the normal range), so as to keep the mattress flat and comfortable and increase the service life.
Use quality sheets
With better quality bed sheet, not only absorb sweat, but also keep the cloth clean.
Don't always sit on the edge of the bed
Do not often sit on the edge of the bed, because the four corners of the mattress are the most vulnerable. If you sit and lie on the edge of the bed for a long time, it is easy to damage the edge spring.
Don't jump on the bed
Don't jump on the bed, or the spring will be damaged if the single point is stressed too much.
Precautions for mattress use:
In case of tea or coffee and other drinks overturned in the bed, should immediately use towel or toilet paper in heavy pressure way to dry, and then blow dry with a hair dryer. When the mattress is not carefully stained with dirt, can be cleaned with soap and water, do not use strong acid, strong alkaline detergent, so as to avoid the fading and damage of the mattress.
Mattress health check:
When you find that the bed cloth is broken or the fancy thread is falling off, you should check the function of your mattress. Check whether the mattress surface is flat, a worn mattress surface is usually uneven or has subsidence phenomenon. Lying in bed will directly feel the spring, that is, when the mattress should be replaced. Lying flat on the mattress, the whole person seems to sink down, is the lack of support. If you wake up in the morning, feel back pain, and can not find other reasons; it is very likely that the mattress has lost its due elasticity, perhaps the whole mattress is too soft or the middle part of the mattress is not solid enough.
Determine whether to replace a new mattress; compare the good mattress that you have slept elsewhere with your current mattress. If there is a big gap, it is the time to change a new mattress.
Check whether the length and width of your mattress is large enough. Generally speaking, the length of the mattress is at least your height plus 15-20 cm. The width depends on the size of the room. In principle, it should not be less than 5 cm, but 6 cm is the best.
