After buying a piece of furniture, it is not only used to set it, but will fade after a long time. If the maintenance work is not done well, it will be damaged. Only by mastering the knowledge of furniture maintenance can the furniture glow brilliantly.
Wood furniture maintenance
Dust removal of soft cotton cloth
Often use soft cotton cloth along the direction of wood grain to wipe off the dust on the furniture surface. Before dust removal, dip some detergent on soft cloth, do not wipe with dry cloth, dry cloth will wipe the surface of flowers and trees furniture. After a period of time, wipe the dust in the corner of the wooden furniture with the wet cotton thread that is twisted dry, and then wipe the whole wood furniture again, and then wipe it with clean dry soft cotton cloth.
You can't stop polishing and waxing
The Polish and wax of wood furniture can't stop. Liquid wax can make a protective layer on the surface of wood, so that the dust can slide down instead of sticking. The sand wax can keep the furniture bright for a long time only with a thin layer.
Treatment of scratches and water marks
For the scratches made by the wood furniture carelessly, buy a crayon with the color similar to that of the furniture, paint the scratch several times, and then wax the scratch part again. Water marks will be formed if the water drops on the wooden furniture are not wiped off. It usually takes a period of time to disappear. A clean soft cloth coated with a small amount of salad oil or mayonnaise can be used to wipe the water mark along the wood grain direction to make the mark fade.
Fabric furniture maintenance
Dry cleaning for longer life
Velvet fabric furniture should not be stained with water, should use dry cleaning agent, all cloth sleeves and bushes should be dry cleaned, do not wash, do not bleach. Vacuum at least once a week, and pay attention to remove the dust between fabric structures.
More turning to prevent wear
Cloth cushion or mattress should be often turned over and used, and it should be turned over once every time to make the wear parts evenly distributed. Furniture against the wall part should be kept with the wall 0.5 to 1 cm gap, in order to prevent contact with the wall and wear.
Avoid direct sunlight
Cloth furniture placed, should try to avoid the overall outdoor sun or long time exposure, overheated temperature will lead to cloth drying and hardening, easy to crack.
Maintenance of leather furniture
Wipe with clean water and keep away from alcohol
In the daily leather furniture cleaning process, wipe with a soft wet cloth, and then dry it with a dry cloth. It's better to use clean water or special cleaning agent, do not use alcohol cleaning agent to scrub.
Leather cleaner keeps leather bright
Leather furniture to avoid oil stains, ballpoint pen, ink, etc., if accidentally dirty, should immediately use leather cleaner cleaning care. When leather furniture is used for a long time, the color of leather will become a little dull. If you wipe it with a cloth dipped with fresh milk, you can restore the original silver color of leather.
Pay attention to the change of temperature and humidity
Wet or dry conditions, leather will be affected, you can use leather protectant for leather sofa wear protective clothing, maintain bright color. Leather sofa should be placed in a ventilated area. The position should not be too wet or too dry to prevent the surface of leather sofa from hardening or fading.
Maintenance of iron furniture
The ground is smooth and avoid bumping
Iron furniture should be placed on the ground should be flat and stable, can make furniture stable on the ground, furniture should not be moved often after placement. Iron furniture to avoid external force bumping, you can choose to put the furniture in other hard objects do not often touch the place, in order to prevent scratch paint or chromium coating off.
Avoid oil, gas, wet and dry
Chrome plated iron furniture is most afraid of gas and oil fume. Therefore, iron furniture can not be placed near gas stove and coal stove to prevent gas and oil fume from corroding chromium plating layer. Iron furniture should be placed in a dry and ventilated place. In the cleaning process, it is best not to wipe the surface directly with wet cloth, and do not use humidifier around it, so as to avoid furniture corrosion.
Regular dust removal and oiling
Iron furniture should be regularly cleaned and dusted. If it is not clean, it will rust easily. When dust removal, it is best to choose a cloth of pure cotton fabric, dip in a mild detergent, and wipe it gently. The dust in the depression can be brushed off along the gap with a fine soft wool brush.
