Cleaning method of white canvas shoes
1. Soak the shoes in warm water for a long time. If possible, put a little vinegar in it (preferably white vinegar).
2. Brush the shoes with pure white toothpaste, and then wash them with water. It's better to use a soft brush.
3. Be sure to rinse clean, especially when washing shoes with washing powder. It is better to soak shoes with water for a period of time after brushing shoes.
4. Wrap the shoes with toilet paper. Wrap the cloth with toilet paper. Put it in a cool and ventilated place to dry everywhere.
If you have indelible stains, you can brush your shoes with white paint
1. The shoes and shoelaces should be separated and washed. The shoes and shoelaces should be washed with whitening soap. The shoes should be rinsed with a soft and fine toothbrush (the canvas should be washed lightly, otherwise it will be easily damaged), and then washed with water.
2. Dilute the white gouache pigment to the water (do not add too much water, just not thick, of course, the white pigment can not be too much), and then use a toothbrush to paint gouache on the shoes. If the dirty places are serious, you can apply more.
3. Just dry your shoes in a well ventilated place.
matters needing attention
No matter whether you use transparent soap, washing powder or detergent when washing shoes, remember to rinse them with clean water. Do not let the residual substances make shoes yellow because of laziness.
According to experience, no matter what method is used to wash shoes, it is better to wrap toilet paper on shoes after washing. The whiter toilet paper is, the better, and the uppers are also wrapped.
How to wash canvas shoes
Canvas shoes are not as clean as leather shoes, nor can they be thrown into the washing machine like clothes. So how should we wash canvas shoes to be clean? Now I will introduce you how to wash canvas shoes.
1. Do not wash directly with water
Do not wash canvas shoes directly with water. The front part and sole part should be brushed with waste toothbrush. Take a dry towel that you don't use, stick it with your index finger and dip it in a little water, and then dip some toothpaste to gently wipe the toe and the edge of the shoe to the heel. You should pay attention to the heel part. Don't use too much force to wipe it gently. Finally, clean the place that has just wiped the toothpaste with a wet towel. It will be very clean!
2. How to take care of the canvas part
For the canvas part, you can use an old toothbrush to dip some soap or washing powder to gently brush the vamp, so that the dirt can be easily removed. If you encounter a relatively dirty place, you can brush it several times more. After cleaning, you can wash the soap bubbles with the toothbrush. In this way, you can also clean the canvas part.
3. Try not to soak the whole pair of shoes in the water
Try not to soak the whole pair of shoes into the water. If they are soaked, they will be washed very clean. However, the service life of the shoes will become very short, because the shoes will be degummed after soaking in water, which is easy to break, so try not to soak in water.
4. Laces
The shoelace part is very simple, but be careful not to leave the shoelaces on the shoes and wash them with the shoes because they are too lazy to remove them. They should be removed and cleaned directly with soap or detergent. So you don't leave ugly stains on the laces.
5. The secret of air drying
After cleaning, it is recommended to dry them in a ventilated place where the sun can't reach. After the shoes are brushed, it's best to wrap the shoes with toilet paper, which is the key to washing canvas shoes! A tight wrap will make the shoes very clean. If you get the shoes, the gum part will not become brittle in the sun.
How to wash board shoes
1. If the sole and side of board shoes (non nylon material part), can spray a little collar clean, after more than ten seconds with a soft toothbrush gently brush, brushing time should not be too long.
2. Attention should be paid to the eyelets when cleaning to prevent the discoloration of metal eyelets and the dirtier vamp. (usually transparent nail polish can be applied to shoe eyes to prevent oxidation of metals).
3. After washing, the foam should be washed away with warm water or cold water, so as to minimize the erosion time of chemicals on shoes.
4. After cleaning, wipe the residual water with a dry cloth immediately. If there is an air cushion, pay attention to wipe the water around the air cushion, so as to avoid some chemical reaction with water causing glue opening.
5. If the small stones caught in the shoe pattern can be removed with toothpick, because the foreign matter will be clamped for a long time to deform the sole pattern, which will affect the sports performance of the shoes to a certain extent.
6. If there is a hard crack on the board upper, pay attention not to continue to rub in the cracked place, which will make the wound dirtier and even the crack bigger.
7. If the upper is PU material or patent leather, you can directly wipe it with a wet cloth. Another kind of artificial leather is similar to anti fur material. When cleaning, pay special attention to the degree of wetting of the cloth. Generally speaking, when cleaning this kind of upper, if you use too wet cloth, the stain will become more and more dirty.
Maintenance of board shoes:
1. Do not use heating or open fire drying, so as to avoid aging, peeling, fading and serious deformation.
2. When the shoes are dirty, you can gently brush them with clean water dipped in detergent, and then rinse them with clean water. Place them in a well ventilated and cool place and let them air dry to avoid direct sunlight and exposure.
3. If it is stored for a long time, the shoes should be cleaned first, and then stored in a cool and ventilated place after drying, so that the shoes can have sufficient time to dry, so as to avoid mildew.
4. Avoid excessive direct sunlight and hot air of hair dryer, improper nursing methods will also reduce the life of shoes; do not soak for a long time (soaking time shall not exceed 20 minutes) when washing.
